Reinforcement Learning¶
This module is a collection of common RL approaches implemented in Lightning.
DQN Models¶
The following models are based on DQN. DQN uses value based learning where it is deciding what action to take based on the model’s current learned value (V), or the state action value (Q) of the current state. These values are defined as the discounted total reward of the agents state or state action pair.
DeepQNetwork (DQN)¶
DQN model introduced in Playing Atari with Deep Reinforcement Learning. Paper authors: Volodymyr Mnih, Koray Kavukcuoglu, David Silver, Alex Graves, Ioannis Antonoglou, Daan Wierstra, Martin Riedmiller.
Original implementation by: Donal Byrne
The DQN was introduced in Playing Atari with Deep Reinforcement Learning by researchers at DeepMind. This took the concept of tabular Q learning and scaled it to much larger problems by approximating the Q function using a deep neural network.
The goal behind DQN was to take the simple control method of Q learning and scale it up in order to solve complicated tasks. As well as this, the method needed to be stable. The DQN solves these issues with the following additions.
Approximated Q Function
Storing Q values in a table works well in theory, but is completely unscalable. Instead, the authors approximate the Q function using a deep neural network. This allows the DQN to be used for much more complicated tasks
Replay Buffer
Similar to supervised learning, the DQN learns on randomly sampled batches of previous data stored in an Experience Replay Buffer. The ‘target’ is calculated using the Bellman equation
and then we optimize using SGD just like a standard supervised learning problem.
DQN Results¶
DQN: Pong
Example:
from pl_bolts.models.rl import DQN
dqn = DQN("PongNoFrameskipv4")
trainer = Trainer()
trainer.fit(dqn)

class
pl_bolts.models.rl.
DQN
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1000, gamma=0.99, learning_rate=0.0001, batch_size=32, replay_size=100000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=1000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.
Basic DQN Model.
PyTorch Lightning implementation of DQN Paper authors: Volodymyr Mnih, Koray Kavukcuoglu, David Silver, Alex Graves, Ioannis Antonoglou, Daan Wierstra, Martin Riedmiller. Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.dqn_model import DQN ... >>> model = DQN("PongNoFrameskipv4")
Train:
trainer = Trainer() trainer.fit(model)
Note
This example is based on: https://github.com/PacktPublishing/DeepReinforcementLearningHandsOnSecondEdition/blob/master/Chapter06/02_dqn_pong.py
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters
eps_start¶ (
float
) – starting value of epsilon for the epsilongreedy explorationeps_end¶ (
float
) – final value of epsilon for the epsilongreedy explorationeps_last_frame¶ (
int
) – the final frame in for the decrease of epsilon. At this frame espilon = eps_endsync_rate¶ (
int
) – the number of iterations between syncing up the target network with the train networkbatch_size¶ (
int
) – size of minibatch pulled from the DataLoaderwarm_start_size¶ (
int
) – how many random steps through the environment to be carried out at the start of training to fill the buffer with a starting pointavg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardmin_episode_reward¶ (
int
) – the minimum score that can be achieved in an episode. Used for filling the avg buffer before training begins

static
add_model_specific_args
(arg_parser)[source] Adds arguments for DQN model.
Note
These params are fine tuned for Pong env.
 Parameters
arg_parser¶ (
ArgumentParser
) – parent parser Return type

forward
(x)[source] Passes in a state x through the network and gets the q_values of each action as an output.

static
make_environment
(env_name, seed=None)[source] Initialise gym environment.

run_n_episodes
(env, n_epsiodes=1, epsilon=1.0)[source] Carries out N episodes of the environment with the current agent.

test_dataloader
()[source] Get test loader.
 Return type

test_step
(*args, **kwargs)[source] Evaluate the agent for 10 episodes.

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.

train_dataloader
()[source] Get train loader.
 Return type

training_step
(batch, _)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.
Double DQN¶
Double DQN model introduced in Deep Reinforcement Learning with Double Qlearning Paper authors: Hado van Hasselt, Arthur Guez, David Silver
Original implementation by: Donal Byrne
The original DQN tends to overestimate Q values during the Bellman update, leading to instability and is harmful to training. This is due to the max operation in the Bellman equation.
We are constantly taking the max of our agents estimates during our update. This may seem reasonable, if we could trust these estimates. However during the early stages of training, the estimates for these values will be off center and can lead to instability in training until our estimates become more reliable
The Double DQN fixes this overestimation by choosing actions for the next state using the main trained network but uses the values of these actions from the more stable target network. So we are still going to take the greedy action, but the value will be less “optimisitc” because it is chosen by the target network.
DQN expected return
Double DQN expected return
Double DQN Results¶
Double DQN: Pong
DQN vs Double DQN: Pong
orange: DQN
blue: Double DQN
Example:
from pl_bolts.models.rl import DoubleDQN
ddqn = DoubleDQN("PongNoFrameskipv4")
trainer = Trainer()
trainer.fit(ddqn)

class
pl_bolts.models.rl.
DoubleDQN
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1000, gamma=0.99, learning_rate=0.0001, batch_size=32, replay_size=100000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=1000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.
Double Deep Qnetwork (DDQN) PyTorch Lightning implementation of Double DQN.
Paper authors: Hado van Hasselt, Arthur Guez, David Silver
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.double_dqn_model import DoubleDQN ... >>> model = DoubleDQN("PongNoFrameskipv4")
Train:
trainer = Trainer() trainer.fit(model)
Note
This example is based on https://github.com/PacktPublishing/DeepReinforcementLearningHandsOnSecondEdition/blob/master/Chapter08/03_dqn_double.py
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters
eps_start¶ (
float
) – starting value of epsilon for the epsilongreedy explorationeps_end¶ (
float
) – final value of epsilon for the epsilongreedy explorationeps_last_frame¶ (
int
) – the final frame in for the decrease of epsilon. At this frame espilon = eps_endsync_rate¶ (
int
) – the number of iterations between syncing up the target network with the train networkbatch_size¶ (
int
) – size of minibatch pulled from the DataLoaderwarm_start_size¶ (
int
) – how many random steps through the environment to be carried out at the start of training to fill the buffer with a starting pointavg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardmin_episode_reward¶ (
int
) – the minimum score that can be achieved in an episode. Used for filling the avg buffer before training begins

training_step
(batch, _)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.
Dueling DQN¶
Dueling DQN model introduced in Dueling Network Architectures for Deep Reinforcement Learning Paper authors: Ziyu Wang, Tom Schaul, Matteo Hessel, Hado van Hasselt, Marc Lanctot, Nando de Freitas
Original implementation by: Donal Byrne
The Q value that we are trying to approximate can be divided into two parts, the value state V(s) and the ‘advantage’ of actions in that state A(s, a). Instead of having one full network estimate the entire Q value, Dueling DQN uses two estimator heads in order to separate the estimation of the two parts.
The value is the same as in value iteration. It is the discounted expected reward achieved from state s. Think of the value as the ‘base reward’ from being in state s.
The advantage tells us how much ‘extra’ reward we get from taking action a while in state s. The advantage bridges the gap between Q(s, a) and V(s) as Q(s, a) = V(s) + A(s, a).
In the paper Dueling Network Architectures for Deep Reinforcement Learning <https://arxiv.org/abs/1511.06581> the network uses two heads, one outputs the value state and the other outputs the advantage. This leads to better training stability, faster convergence and overall better results. The V head outputs a single scalar (the state value), while the advantage head outputs a tensor equal to the size of the action space, containing an advantage value for each action in state s.
Changing the network architecture is not enough, we also need to ensure that the advantage mean is 0. This is done by subtracting the mean advantage from the Q value. This essentially pulls the mean advantage to 0.
Dueling DQN Benefits¶
Ability to efficiently learn the state value function. In the dueling network, every Q update also updates the value stream, where as in DQN only the value of the chosen action is updated. This provides a better approximation of the values
The differences between total Q values for a given state are quite small in relation to the magnitude of Q. The difference in the Q values between the best action and the second best action can be very small, while the average state value can be much larger. The differences in scale can introduce noise, which may lead to the greedy policy switching the priority of these actions. The seperate estimators for state value and advantage makes the Dueling DQN robust to this type of scenario
Dueling DQN Results¶
The results below a noticeable improvement from the original DQN network.
Dueling DQN baseline: Pong
Similar to the results of the DQN baseline, the agent has a period where the number of steps per episodes increase as it begins to hold its own against the heuristic oppoent, but then the steps per episode quickly begins to drop as it gets better and starts to beat its opponent faster and faster. There is a noticable point at step ~250k where the agent goes from losing to winning.
As you can see by the total rewards, the dueling network’s training progression is very stable and continues to trend upward until it finally plateus.
DQN vs Dueling DQN: Pong
In comparison to the base DQN, we see that the Dueling network’s training is much more stable and is able to reach a score in the high teens faster than the DQN agent. Even though the Dueling network is more stable and out performs DQN early in training, by the end of training the two networks end up at the same point.
This could very well be due to the simplicity of the Pong environment.
Orange: DQN
Red: Dueling DQN
Example:
from pl_bolts.models.rl import DuelingDQN
dueling_dqn = DuelingDQN("PongNoFrameskipv4")
trainer = Trainer()
trainer.fit(dueling_dqn)

class
pl_bolts.models.rl.
DuelingDQN
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1000, gamma=0.99, learning_rate=0.0001, batch_size=32, replay_size=100000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=1000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of Dueling DQN
Paper authors: Ziyu Wang, Tom Schaul, Matteo Hessel, Hado van Hasselt, Marc Lanctot, Nando de Freitas
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.dueling_dqn_model import DuelingDQN ... >>> model = DuelingDQN("PongNoFrameskipv4")
Train:
trainer = Trainer() trainer.fit(model)
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters
eps_start¶ (
float
) – starting value of epsilon for the epsilongreedy explorationeps_end¶ (
float
) – final value of epsilon for the epsilongreedy explorationeps_last_frame¶ (
int
) – the final frame in for the decrease of epsilon. At this frame espilon = eps_endsync_rate¶ (
int
) – the number of iterations between syncing up the target network with the train networkbatch_size¶ (
int
) – size of minibatch pulled from the DataLoaderwarm_start_size¶ (
int
) – how many random steps through the environment to be carried out at the start of training to fill the buffer with a starting pointavg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardmin_episode_reward¶ (
int
) – the minimum score that can be achieved in an episode. Used for filling the avg buffer before training begins
Noisy DQN¶
Noisy DQN model introduced in Noisy Networks for Exploration Paper authors: Meire Fortunato, Mohammad Gheshlaghi Azar, Bilal Piot, Jacob Menick, Ian Osband, Alex Graves, Vlad Mnih, Remi Munos, Demis Hassabis, Olivier Pietquin, Charles Blundell, Shane Legg
Original implementation by: Donal Byrne
Up until now the DQN agent uses a seperate exploration policy, generally epsilongreedy where start and end values are set for its exploration. Noisy Networks For Exploration <https://arxiv.org/abs/1706.10295> introduces a new exploration strategy by adding noise parameters to the weights of the fully connect layers which get updated during backpropagation of the network. The noise parameters drive the exploration of the network instead of simply taking random actions more frequently at the start of training and less frequently towards the end. The of authors of propose two ways of doing this.
During the optimization step a new set of noisy parameters are sampled. During training the agent acts according to the fixed set of parameters. At the next optimization step, the parameters are updated with a new sample. This ensures the agent always acts based on the parameters that are drawn from the current noise distribution.
The authors propose two methods of injecting noise to the network.
Independent Gaussian Noise: This injects noise per weight. For each weight a random value is taken from the distribution. Noise parameters are stored inside the layer and are updated during backpropagation. The output of the layer is calculated as normal.
Factorized Gaussian Noise: This injects nosier per input/ouput. In order to minimize the number of random values this method stores two random vectors, one with the size of the input and the other with the size of the output. Using these two vectors, a random matrix is generated for the layer by calculating the outer products of the vector
Noisy DQN Benefits¶
Improved exploration function. Instead of just performing completely random actions, we add decreasing amount of noise and uncertainty to our policy allowing to explore while still utilising its policy.
The fact that this method is automatically tuned means that we do not have to tune hyper parameters for epsilongreedy!
Note
For now I have just implemented the Independant Gaussian as it has been reported there isn’t much difference in results for these benchmark environments.
In order to update the basic DQN to a Noisy DQN we need to do the following
Noisy DQN Results¶
The results below improved stability and faster performance growth.
Noisy DQN baseline: Pong
Similar to the other improvements, the average score of the agent reaches positive numbers around the 250k mark and steadily increases till convergence.
DQN vs Noisy DQN: Pong
In comparison to the base DQN, the Noisy DQN is more stable and is able to converge on an optimal policy much faster than the original. It seems that the replacement of the epsilongreedy strategy with network noise provides a better form of exploration.
Orange: DQN
Red: Noisy DQN
Example:
from pl_bolts.models.rl import NoisyDQN
noisy_dqn = NoisyDQN("PongNoFrameskipv4")
trainer = Trainer()
trainer.fit(noisy_dqn)

class
pl_bolts.models.rl.
NoisyDQN
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1000, gamma=0.99, learning_rate=0.0001, batch_size=32, replay_size=100000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=1000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of Noisy DQN
Paper authors: Meire Fortunato, Mohammad Gheshlaghi Azar, Bilal Piot, Jacob Menick, Ian Osband, Alex Graves, Vlad Mnih, Remi Munos, Demis Hassabis, Olivier Pietquin, Charles Blundell, Shane Legg
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.noisy_dqn_model import NoisyDQN ... >>> model = NoisyDQN("PongNoFrameskipv4")
Train:
trainer = Trainer() trainer.fit(model)
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters
eps_start¶ (
float
) – starting value of epsilon for the epsilongreedy explorationeps_end¶ (
float
) – final value of epsilon for the epsilongreedy explorationeps_last_frame¶ (
int
) – the final frame in for the decrease of epsilon. At this frame espilon = eps_endsync_rate¶ (
int
) – the number of iterations between syncing up the target network with the train networkbatch_size¶ (
int
) – size of minibatch pulled from the DataLoaderwarm_start_size¶ (
int
) – how many random steps through the environment to be carried out at the start of training to fill the buffer with a starting pointavg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardmin_episode_reward¶ (
int
) – the minimum score that can be achieved in an episode. Used for filling the avg buffer before training begins

on_train_start
()[source] Set the agents epsilon to 0 as the exploration comes from the network.
 Return type

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader. This is the same function as the standard DQN except that we dont update epsilon as it is always 0. The exploration comes from the noisy network.
NStep DQN¶
NStep DQN model introduced in Learning to Predict by the Methods of Temporal Differences Paper authors: Richard S. Sutton
Original implementation by: Donal Byrne
N Step DQN was introduced in Learning to Predict by the Methods of Temporal Differences. This method improves upon the original DQN by updating our Q values with the expected reward from multiple steps in the future as opposed to the expected reward from the immediate next state. When getting the Q values for a state action pair using a single step which looks like this
but because the Q function is recursive we can continue to roll this out into multiple steps, looking at the expected return for each step into the future.
The above example shows a 2Step look ahead, but this could be rolled out to the end of the episode, which is just Monte Carlo learning. Although we could just do a monte carlo update and look forward to the end of the episode, it wouldn’t be a good idea. Every time we take another step into the future, we are basing our approximation off our current policy. For a large portion of training, our policy is going to be less than optimal. For example, at the start of training, our policy will be in a state of high exploration, and will be little better than random.
Note
For each rollout step you must scale the discount factor accordingly by the number of steps. As you can see from the equation above, the second gamma value is to the power of 2. If we rolled this out one step further, we would use gamma to the power of 3 and so.
So if we are aproximating future rewards off a bad policy, chances are those approximations are going to be pretty bad and every time we unroll our update equation, the worse it will get. The fact that we are using an off policy method like DQN with a large replay buffer will make this even worse, as there is a high chance that we will be training on experiences using an old policy that was worse than our current policy.
So we need to strike a balance between looking far enough ahead to improve the convergence of our agent, but not so far that are updates become unstable. In general, small values of 24 work best.
NStep Benefits¶
MultiStep learning is capable of learning faster than typical 1 step learning methods.
Note that this method introduces a new hyperparameter n. Although n=4 is generally a good starting point and provides good results across the board.
NStep Results¶
As expected, the NStep DQN converges much faster than the standard DQN, however it also adds more instability to the loss of the agent. This can be seen in the following experiments.
NStep DQN: Pong
The NStep DQN shows the greatest increase in performance with respect to the other DQN variations. After less than 150k steps the agent begins to consistently win games and achieves the top score after ~170K steps. This is reflected in the sharp peak of the total episode steps and of course, the total episode rewards.
DQN vs NStep DQN: Pong
This improvement is shown in stark contrast to the base DQN, which only begins to win games after 250k steps and requires over twice as many steps (450k) as the NStep agent to achieve the high score of 21. One important thing to notice is the large increase in the loss of the NStep agent. This is expected as the agent is building its expected reward off approximations of the future states. The large the size of N, the greater the instability. Previous literature, listed below, shows the best results for the Pong environment with an N step between 35. For these experiments I opted with an N step of 4.
Example:
from pl_bolts.models.rl import DQN
n_step_dqn = DQN("PongNoFrameskipv4", n_steps=4)
trainer = Trainer()
trainer.fit(n_step_dqn)
Prioritized Experience Replay DQN¶
Double DQN model introduced in Prioritized Experience Replay Paper authors: Tom Schaul, John Quan, Ioannis Antonoglou, David Silver
Original implementation by: Donal Byrne
The standard DQN uses a buffer to break up the correlation between experiences and uniform random samples for each batch. Instead of just randomly sampling from the buffer prioritized experience replay (PER) prioritizes these samples based on training loss. This concept was introduced in the paper Prioritized Experience Replay
Essentially we want to train more on the samples that surprise the agent.
The priority of each sample is defined below where
where pi is the priority of the ith sample in the buffer and 𝛼 is the number that shows how much emphasis we give to the priority. If 𝛼 = 0 , our sampling will become uniform as in the classic DQN method. Larger values for 𝛼 put more stress on samples with higher priority
Its important that new samples are set to the highest priority so that they are sampled soon. This however introduces bias to new samples in our dataset. In order to compensate for this bias, the value of the weight is defined as
Where beta is a hyper parameter between 01. When beta is 1 the bias is fully compensated. However authors noted that in practice it is better to start beta with a small value near 0 and slowly increase it to 1.
PER Benefits¶
The benefits of this technique are that the agent sees more samples that it struggled with and gets more chances to improve upon it.
Memory Buffer
First step is to replace the standard experience replay buffer with the prioritized experience replay buffer. This is pretty large (100+ lines) so I wont go through it here. There are two buffers implemented. The first is a naive list based buffer found in memory.PERBuffer and the second is more efficient buffer using a Sum Tree datastructure.
The list based version is simpler, but has a sample complexity of O(N). The Sum Tree in comparison has a complexity of O(1) for sampling and O(logN) for updating priorities.
Update loss function
The next thing we do is to use the sample weights that we get from PER. Add the following code to the end of the loss function. This applies the weights of our sample to the batch loss. Then we return the mean loss and weighted loss for each datum, with the addition of a small epsilon value.
PER Results¶
The results below show improved stability and faster performance growth.
PER DQN: Pong
Similar to the other improvements, we see that PER improves the stability of the agents training and shows to converged on an optimal policy faster.
DQN vs PER DQN: Pong
In comparison to the base DQN, the PER DQN does show improved stability and performance. As expected, the loss of the PER DQN is siginificantly lower. This is the main objective of PER by focusing on experiences with high loss.
It is important to note that loss is not the only metric we should be looking at. Although the agent may have very low loss during training, it may still perform poorly due to lack of exploration.
Orange: DQN
Pink: PER DQN
Example:
from pl_bolts.models.rl import PERDQN
per_dqn = PERDQN("PongNoFrameskipv4")
trainer = Trainer()
trainer.fit(per_dqn)

class
pl_bolts.models.rl.
PERDQN
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1000, gamma=0.99, learning_rate=0.0001, batch_size=32, replay_size=100000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=1000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of DQN With Prioritized Experience Replay.
Paper authors: Tom Schaul, John Quan, Ioannis Antonoglou, David Silver
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.per_dqn_model import PERDQN ... >>> model = PERDQN("PongNoFrameskipv4")
Train:
trainer = Trainer() trainer.fit(model)
Note
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters
eps_start¶ (
float
) – starting value of epsilon for the epsilongreedy explorationeps_end¶ (
float
) – final value of epsilon for the epsilongreedy explorationeps_last_frame¶ (
int
) – the final frame in for the decrease of epsilon. At this frame espilon = eps_endsync_rate¶ (
int
) – the number of iterations between syncing up the target network with the train networkbatch_size¶ (
int
) – size of minibatch pulled from the DataLoaderwarm_start_size¶ (
int
) – how many random steps through the environment to be carried out at the start of training to fill the buffer with a starting pointavg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardmin_episode_reward¶ (
int
) – the minimum score that can be achieved in an episode. Used for filling the avg buffer before training begins

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.

training_step
(batch, _)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.
 Parameters
 Return type
 Returns
Training loss and log metrics
Policy Gradient Models¶
The following models are based on Policy Gradients. Unlike the Q learning models shown before, Policy based models do not try and learn the specifc values of state or state action pairs. Instead it cuts out the middle man and directly learns the policy distribution. In Policy Gradient models we update our network parameters in the direction suggested by our policy gradient in order to find a policy that produces the highest results.
 Policy Gradient Key Points:
Outputs a distribution of actions instead of discrete Q values
Optimizes the policy directly, instead of indirectly through the optimization of Q values
The policy distribution of actions allows the model to handle more complex action spaces, such as continuous actions
The policy distribution introduces stochasticity, providing natural exploration to the model
The policy distribution provides a more stable update as a change in weights will only change the total distribution slightly, as opposed to changing weights based on the Q value of state S will change all Q values with similar states.
Policy gradients tend to converge faste, however they are not as sample efficient and generally require more interactions with the environment.
REINFORCE¶
REINFORCE model introduced in Policy Gradient Methods For Reinforcement Learning With Function Approximation Paper authors: Richard S. Sutton, David McAllester, Satinder Singh, Yishay Mansour
Original implementation by: Donal Byrne
REINFORCE is one of the simplest forms of the Policy Gradient method of RL. This method uses a Monte Carlo rollout, where its steps through entire episodes of the environment to build up trajectories computing the total rewards. The algorithm is as follows:
Initialize our network.
Play N full episodes saving the transitions through the environment.
For every step t in each episode k we calculate the discounted reward of the subsequent steps.
Calculate the loss for all transitions.
Perform SGD on the loss and repeat.
What this loss function is saying is simply that we want to take the log probability of action A at state S given our policy (network output). This is then scaled by the discounted reward that we calculated in the previous step. We then take the negative of our sum. This is because the loss is minimized during SGD, but we want to maximize our policy.
Note
The current implementation does not actually wait for the batch episodes the complete every time as we pass in a fixed batch size. For the time being we simply use a large batch size to accomodate this. This approach still works well for simple tasks as it still manages to get an accurate Q value by using a large batch size, but it is not as accurate or completely correct. This will be updated in a later version.
REINFORCE Benefits¶
Simple and straightforward
Computationally more efficient for simple tasks such as Cartpole than the Value Based methods.
REINFORCE Results¶
Hyperparameters:
Batch Size: 800
Learning Rate: 0.01
Episodes Per Batch: 4
Gamma: 0.99
TODO: Add results graph
Example:
from pl_bolts.models.rl import Reinforce
reinforce = Reinforce("CartPolev0")
trainer = Trainer()
trainer.fit(reinforce)

class
pl_bolts.models.rl.
Reinforce
(env, gamma=0.99, lr=0.01, batch_size=8, n_steps=10, avg_reward_len=100, entropy_beta=0.01, epoch_len=1000, num_batch_episodes=4, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of REINFORCE.
Paper authors: Richard S. Sutton, David McAllester, Satinder Singh, Yishay Mansour
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.reinforce_model import Reinforce ... >>> model = Reinforce("CartPolev0")
Train:
trainer = Trainer() trainer.fit(model)
Note
This example is based on: https://github.com/PacktPublishing/DeepReinforcementLearningHandsOnSecondEdition/blob/master/Chapter11/02_cartpole_reinforce.py
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters

static
add_model_specific_args
(arg_parser)[source] Adds arguments for DQN model.
Note
These params are fine tuned for Pong env.
 Parameters
arg_parser¶ – the current argument parser to add to
 Return type
 Returns
arg_parser with model specific cargs added

calc_qvals
(rewards)[source] Calculate the discounted rewards of all rewards in list.

discount_rewards
(experiences)[source] Calculates the discounted reward over N experiences.

forward
(x)[source] Passes in a state x through the network and gets the q_values of each action as an output.

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.

train_dataloader
()[source] Get train loader.
 Return type

training_step
(batch, _)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.
Vanilla Policy Gradient¶
Vanilla Policy Gradient model introduced in Policy Gradient Methods For Reinforcement Learning With Function Approximation Paper authors: Richard S. Sutton, David McAllester, Satinder Singh, Yishay Mansour
Original implementation by: Donal Byrne
Vanilla Policy Gradient (VPG) expands upon the REINFORCE algorithm and improves some of its major issues. The major issue with REINFORCE is that it has high variance. This can be improved by subtracting a baseline value from the Q values. For this implementation we use the average reward as our baseline.
Although Policy Gradients are able to explore naturally due to the stochastic nature of the model, the agent can still frequently be stuck in a local optima. In order to improve this, VPG adds an entropy term to improve exploration.
To further control the amount of additional entropy in our model we scale the entropy term by a small beta value. The scaled entropy is then subtracted from the policy loss.
VPG Benefits¶
Addition of the baseline reduces variance in the model
Improved exploration due to entropy bonus
VPG Results¶
Hyperparameters:
Batch Size: 8
Learning Rate: 0.001
N Steps: 10
N environments: 4
Entropy Beta: 0.01
Gamma: 0.99
Example:
from pl_bolts.models.rl import VanillaPolicyGradient
vpg = VanillaPolicyGradient("CartPolev0")
trainer = Trainer()
trainer.fit(vpg)

class
pl_bolts.models.rl.
VanillaPolicyGradient
(env, gamma=0.99, lr=0.01, batch_size=8, n_steps=10, avg_reward_len=100, entropy_beta=0.01, epoch_len=1000, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of Vanilla Policy Gradient.
Paper authors: Richard S. Sutton, David McAllester, Satinder Singh, Yishay Mansour
Model implemented by:
Donal Byrne <https://github.com/djbyrne>
Example
>>> from pl_bolts.models.rl.vanilla_policy_gradient_model import VanillaPolicyGradient ... >>> model = VanillaPolicyGradient("CartPolev0")
Train:
trainer = Trainer() trainer.fit(model)
Note
This example is based on: https://github.com/PacktPublishing/DeepReinforcementLearningHandsOnSecondEdition/blob/master/Chapter11/04_cartpole_pg.py
Note
Currently only supports CPU and single GPU training with distributed_backend=dp
 Parameters

static
add_model_specific_args
(arg_parser)[source] Adds arguments for DQN model.
Note
These params are fine tuned for Pong env.
 Parameters
arg_parser¶ – the current argument parser to add to
 Return type
 Returns
arg_parser with model specific cargs added

compute_returns
(rewards)[source] Calculate the discounted rewards of the batched rewards.
 Parameters
rewards¶ – list of batched rewards
 Returns
list of discounted rewards

forward
(x)[source] Passes in a state x through the network and gets the q_values of each action as an output.

loss
(states, actions, scaled_rewards)[source] Calculates the loss for VPG.

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.

train_dataloader
()[source] Get train loader.
 Return type

training_step
(batch, _)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.
ActorCritic Models¶
The following models are based on Actor Critic. Actor Critic conbines the approaches of valuebased learning (the DQN family) and the policybased learning (the PG family) by learning the value function as well as the policy distribution. This approach updates the policy network according to the policy gradient, and updates the value network to fit the discounted rewards.
 Actor Critic Key Points:
Actor outputs a distribution of actions for controlling the agent
Critic outputs a value of current state for policy update suggestion
The addition of critic allows the model to do nstep training instead of generating an entire trajectory
Advantage Actor Critic (A2C)¶
(Asynchronous) Advantage Actor Critic model introduced in Asynchronous Methods for Deep Reinforcement Learning Paper authors: Volodymyr Mnih, Adrià Puigdomènech Badia, Mehdi Mirza, Alex Graves, Timothy P. Lillicrap, Tim Harley, David Silver, Koray Kavukcuoglu
Original implementation by: Jason Wang
Advantage Actor Critic (A2C) is the classical actor critic approach in reinforcement learning. The underlying neural network has an actor head and a critic head to output action distribution as well as value of current state. Usually the first few layers are shared by the two heads to prevent learning similar stuff twice. It builds upon the idea of using a baseline of average reward to reduce variance (in VPG) by using the critic as a baseline which could theoretically have better performance.
The algorithm can use an nstep training approach instead of generating an entire trajectory. The algorithm is as follows:
Initialize our network.
Rollout n steps and save the transitions (states, actions, rewards, values, dones).
Calculate the nstep (discounted) return by bootstrapping the last value.
Calculate actor loss using values as baseline.
Calculate critic loss using returns as target.
Calculate entropy bonus to encourage exploration.
Calculate total loss as a weighted sum of the three components above.
Perform gradient descent to update our network.
Note
The current implementation only support discrete action space, and has only been tested on the CartPole environment.
A2C Benefits¶
Combines the benefit from valuebased learning and policybased learning
Further reduces variance using the critic as a value estimator
A2C Results¶
Hyperparameters:
Batch Size: 32
Learning Rate: 0.001
Entropy Beta: 0.01
Critic Beta: 0.5
Gamma: 0.99
Example:
from pl_bolts.models.rl import AdvantageActorCritic
a2c = AdvantageActorCritic("CartPolev0")
trainer = Trainer()
trainer.fit(a2c)

class
pl_bolts.models.rl.
AdvantageActorCritic
(env, gamma=0.99, lr=0.001, batch_size=32, avg_reward_len=100, entropy_beta=0.01, critic_beta=0.5, epoch_len=1000, **kwargs)[source] Bases:
pytorch_lightning.
PyTorch Lightning implementation of Advantage Actor Critic.
Paper Authors: Volodymyr Mnih, Adrià Puigdomènech Badia, et al.
Model implemented by:
Example
>>> from pl_bolts.models.rl import AdvantageActorCritic ... >>> model = AdvantageActorCritic("CartPolev0")
 Parameters
batch_size¶ (
int
) – size of minibatch pulled from the DataLoaderbatch_episodes¶ – how many episodes to rollout for each batch of training
avg_reward_len¶ (
int
) – how many episodes to take into account when calculating the avg rewardentropy_beta¶ (
float
) – dictates the level of entropy per batchcritic_beta¶ (
float
) – dictates the level of critic loss per batch

static
add_model_specific_args
(arg_parser)[source] Adds arguments for A2C model.
 Parameters
arg_parser¶ (
ArgumentParser
) – the current argument parser to add to Return type
 Returns
arg_parser with model specific cargs added

compute_returns
(rewards, dones, last_value)[source] Calculate the discounted rewards of the batched rewards.

forward
(x)[source] Passes in a state x through the network and gets the log prob of each action and the value for the state as an output.

loss
(states, actions, returns)[source] Calculates the loss for A2C which is a weighted sum of actor loss (MSE), critic loss (PG), and entropy (for exploration)

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.
 Return type
 Returns
yields a tuple of Lists containing tensors for states, actions, and returns of the batch.
Note
This is what’s taken by the dataloader: states: a list of numpy array actions: a list of list of int returns: a torch tensor

train_dataloader
()[source] Get train loader.
 Return type
Soft Actor Critic (SAC)¶
Soft Actor Critic model introduced in Soft ActorCritic: OffPolicy Maximum Entropy Deep Reinforcement Learning with a Stochastic Actor Paper authors: Tuomas Haarnoja, Aurick Zhou, Pieter Abbeel, Sergey Levine
Original implementation by: Jason Wang
Soft Actor Critic (SAC) is a powerful actor critic algorithm in reinforcement learning. Unlike A2C, SAC’s policy outputs a special continuous distribution for actions, and its critic estimates the Q value instead of the state value, which means it now takes in not only states but also actions. The new actor allows SAC to support continuous action tasks such as controlling robots, and the new critic allows SAC to support offpolicy learning which is more sample efficient.
The actor has a new objective to maximize entropy to encourage exploration while maximizing the expected rewards. The critic uses two separate Q functions to “mitigate positive bias” during training by picking the minimum of the two as the predicted Q value.
Since SAC is offpolicy, its algorithm’s training step is quite similar to DQN:
Initialize one policy network, two Q networks, and two corresponding target Q networks.
Run 1 step using action sampled from policy and store the transition into the replay buffer.
Sample transitions (states, actions, rewards, dones, next states) from the replay buffer.
Compute actor loss and update policy network.
Compute Q target
Compute critic loss and update Q network..
Soft update the target Q network using a weighted sum of itself and the Q network.
SAC Benefits¶
More sample efficient due to offpolicy training
Supports continuous action space
SAC Results¶
 Example::
from pl_bolts.models.rl import SAC sac = SAC(“Pendulumv0”) trainer = Trainer() trainer.fit(sac)

class
pl_bolts.models.rl.
SAC
(env, eps_start=1.0, eps_end=0.02, eps_last_frame=150000, sync_rate=1, gamma=0.99, policy_learning_rate=0.0003, q_learning_rate=0.0003, target_alpha=0.005, batch_size=128, replay_size=1000000, warm_start_size=10000, avg_reward_len=100, min_episode_reward= 21, seed=123, batches_per_epoch=10000, n_steps=1, **kwargs)[source] Bases:
pytorch_lightning.

static
add_model_specific_args
(arg_parser)[source] Adds arguments for DQN model.
Note
These params are fine tuned for Pong env.
 Parameters
arg_parser¶ (
ArgumentParser
) – parent parser Return type

forward
(x)[source] Passes in a state x through the network and gets the q_values of each action as an output.

loss
(batch)[source] Calculates the loss for SAC which contains a total of 3 losses.

run_n_episodes
(env, n_epsiodes=1)[source] Carries out N episodes of the environment with the current agent without exploration.

soft_update_target
(q_net, target_net)[source] Update the weights in target network using a weighted sum.
w_target := (1a) * w_target + a * w_q

test_dataloader
()[source] Get test loader.
 Return type

test_step
(*args, **kwargs)[source] Evaluate the agent for 10 episodes.

train_batch
()[source] Contains the logic for generating a new batch of data to be passed to the DataLoader.

train_dataloader
()[source] Get train loader.
 Return type

training_step
(batch, _, optimizer_idx)[source] Carries out a single step through the environment to update the replay buffer. Then calculates loss based on the minibatch recieved.

static